Reinitialize your Holosun EPS Carry Red Dot Sight

Wiki Article

Occasionally, you may require to restore your Holosun EPS Carry Red Dot sight to its factory settings. This can be helpful if you've been tinkering with the configurations or are experiencing unexpected issues. Fortunately, resetting your Holosun is a simple process that can be completed in just a few actions.

• Initially ensuring your red dot sight is turned on.
• Locate the small reinitialize button on the rear of the sight.
• Utilize a thin tool to depress the reset switch for approximately 5 seconds.
• Release the lever and your Holosun EPS Carry Red Dot sight will restart.
• Your red dot sight should now be set back to its factory settings.

Restore Your Holosun EPS Carry Red Dot to Defaults

In case you've tweaked your Holosun EPS Carry red dot settings and want to go back to basics, resetting it to its factory configuration is a breeze. First, locate the tiny button on the side of your optic. Then, sustain it for around five seconds until you see the indicator light change. Your Holosun EPS Carry is now reverted to its factory settings, ready for consistent targeting.

revive your Holosun EPS Carry Back to : Functionality

Is your beloved Holosun EPS Carry experiencing some issues? Don't despair! A simple factory reset can often solve the problem and get your red dot sight back to its former glory. Before you begin, remember to remove the battery from your Holosun EPS Carry to prevent accidental activation during the process.

To perform a factory reset on your Holosun EPS Carry, follow these simple steps:

• Simultaneously press and hold the power button for approximately 7 seconds.
• A message will flash, indicating that the reset is successfuly initiated.
• Let go of the power button once the reset is complete.

Your Holosun EPS Carry should now be back to its factory settings. You can connect the battery and confirm your sight's functionality. If you encounter any further difficulties, don't hesitate to seek help from Holosun's support.

Restore Factory Settings on Your Holosun EPS Carry: A Step-by-Step Guide

Resetting your Holosun EPS Carry to factory settings can be a helpful solution if you're experiencing issues with the optic or simply want to start fresh. This process erases all user configurations and returns the sight to its original state. Before proceeding, remember to note down any customizations you have made as they will be lost during this process. Adhere to these steps carefully to ensure a successful factory reset.

• First, Activate your Holosun EPS Carry by pressing the power button.
• After that, press and hold both the mode button and the up/down adjustment button simultaneously.
• During continue holding these buttons, tap the power button once.
• You will show a confirmation prompt indicating that the reset process is initiated.
• Enable the process to conclude. This may take a few moments. Once done, your Holosun EPS Carry will automatically power off.

After resetting your Holosun EPS Carry to factory settings, you will need to re-enter any desired customizations, more info such as brightness levels and reticule style. Refer to the user manual for detailed instructions on configuring your optic after a reset.

Reset All Settings on Your Holosun EPS Carry

To Default reset your Holosun EPS Carry sight, you'll need to access the settings menu. This can usually be done by Holding a specific button combination. Consult your Instruction for the exact button sequence for your model. Once in the settings menu, look for an option that says "Reset All". Select this option and confirm the reset. Your sight will then power off and restart with all settings Returned to their default values.

Reset your Holosun EPS Carry with a Factory Default Settings

If your Holosun EPS Carry is acting funny, a factory reset might be the solution. This will return your sight to its original settings, clearing any custom configurations you've made. To execute this reset, follow these straightforward steps:

• Initially, identify the reset lever on your EPS Carry.
• Secondly, press a small object, like a paperclip, to push the reset lever.
• While keep the reset switch pressed, turn your EPS Carry.
• You'll display a message confirming that the reset is successful.

When the reset is complete, your EPS Carry will be back to its factory settings.

Report this wiki page